温州永邦机械有限公司 温州永邦机械有限公司

YB-1650G 复合机

On behalf of the latest technology of corrugation to corrugation laminating machine,
for the lamination of 2 ply single face to single face.
the fastest speed, positioning the most accurate, the most convenient operation,
only press the size of paper, machine will automatically adjust the size of each
part to the corresponding position, the full realization of intelligent operation.
Model:
YB-1650G
Contact Now
YB-1650G 复合机

YB-1650G  Corrugation to Corrugation Laminating Machine


INTRODUCTION:
 

Youbond corrugation to corrugation laminating machine, a customized model special for

the corrugation manufacturer, which fills a vacancy of the laminating equipment in the

world. Its low investment, small occupy and easy set-up is a good complement to the large

corrugation production line. This machine is easy handling, when set up the sheet size, all

machine parts will adjust automatically, which completely realizes the intelligent operation.

 


CHARACTERISTICS:

01. Max Speed 10000sheets/hour

02. Fully intelligent automation

03. Auto adjustment of replace different paper

04. Curve Speed positioning make sure accuracy

05. The latest technology of intermittent positioning

06. Bottom and top sheet automatic tracking system

07. Bottom paper left and right all course correction 

08. Top sheet left and right all course correction

09. Intelligent detection paper length
10. Intelligent fault display and alarm system

11. Intelligent glue supply recovery system

12. Intelligent cleaning water cycle system

13. Bottom paper bending and pressing device

14. Bottom paper suction power adjust device

15. America MAC retractable air suction

16. Bottom paper belt automatic cleaning device

17. The most advanced electrical control system

18. Working type pre stack paper lifting device

19. All stainless steel glue roller configuration

20. Anti rejection glue protective device

21. Max speed 10000 sheets/hour


SPECIFICATION:

Model YB-1650G
Max Sheet Size 1650×1450mm
Min sheet Size 550×550mm
Max Speed(sheets/hour) 10000sheets/hour
Fitting Precision ±0.5mm
Measurement 10×2.4×2.4M
Machine Weight 7500kg
Machine Power 22KW/380V

                     Top paper

             A/B/C/E/F Two layers corrugated paper

                Bottom paper

             A/B/C/E/F Two layers corrugated paper

 CONFIGURATION LIST:

Touch Screen AC Servo driver
Place of origin:Germany Place of origin:Japan
Brand:SIEMENS Brand:YASKAWA
Servo Motor Frequency Converter
Place of origin:Japan Place of origin:Japan
Brand:YASKAWA Brand:YASKAWA
PLC Main Motor 
Place of origin:Germany Place of origin:Taiwan
Brand:SIEMENS Brand:CPG
Drive Chain Synchronous Belt
Place of origin:Germany Place of origin:Germany
Brand:IWIS Brand:CONTINETAL
Bearing Suction Belt
Place of origin:Japan Place of origin:Japan
Brand:NSK Brand:NITTA
Tension Vacuum Pump
Place of origin:Switzerland Place of origin:Germany
Brand:ROSTA Brand:BECKER
Contactor Solenoid valve 
Place of origin:France Place of origin:USA
Brand:Schneider Brand:MAC
Push Button Low Voltage
Place of origin:France Place of origin:France
Brand:Schneider Brand:Schneider
Spring Linear Rail System
Place of origin:Japan Place of origin:Taiwan
Brand:DAIDO Brand:HIWIN
 

BRANCH INTRODUCTION:

1. TOP/BOTTOM PAPER FEEDING

Use imported Servo motor electric controlling system, with Japan  NITTA suction belt to 
make suction power inverter, and belt cleaned by water roller; Patented technology to 
ensure corrugate and cardboard goes out smoothly and simple operation.

2. POSITIONING PART


Servo control of the intermittent fixed position, in the process of positioning, positioning 
gauge work as” start – speed up – trackingspeed reduction-stop ” curve speed run, make 
sure positioning more accurate.
 
3.SIDE POSITIONING

Left and right side synchronous block complete the accurate positioning, both top sheet 
and bottom paper are equipped with accurate positioning device on left and right.
 
4.GLUE ROLLER

Stainless steel roller, never rust, after narrowly grinding, guaranteed the minimum 
amount glue coated evenly. Down roller be cleaned by water roller.

5.TRANSMISSION

With imported double teeth belt drive and Switzerland ROSTA tension device ensure 
the drive accurate, stable and low noisy.

6.ELECTRICAL SYSTEM

Designed in the accordance with European CE requirement, ensure machine stability, 
high efficiency and low failure. Using man-machine interface and PLC combination, 
display all the information, such as warning, error detect, failures, and operating 
speed, etc on the screen at a glance.

Feedback